|
|
|
Models 4001A-P and 4001C-P
NIM Bins |
|
- Mounting and power distribution for standard NIM modules
- Compatible with 4002A, 4002D, and 4002E NIM Bin Power Supplies
- Adjustment-free bin construction
- Exceeds DOE/ER-0457T recommended specifications
- Low-impedance, bus bar, power distribution with the 4001C
General
The Models 4001A-P and
4001C-P NIM Bins accommodate any equipment modules that have been
manufactured to NIM standards as defined in DOE/ER-0457T. The bins are
constructed of wire-form grids to ensure unimpeded ventilation for the
instruments operated in the enclosure. The adjustment-free module guides
are superior to the requirements specified in DOE/ER-0457T. These hardened
steel guides feature generous openings and, because of their
highly-polished nickel plating, offer a low friction coefficient. Aluminum
alloy side plates are precision-formed and protected with a painted
finish. Secure mounting for the 4002A, 4002D, or 4002E Power Supplies is
furnished by the precision-stamped, plated-steel, connector mounting
plate.
The Model 4001A-P Bin distributes all DC and AC voltages from the
power supply to the module connectors through a wiring harness. The
4001C-P Bin distributes the power through heavy-duty copper bus bars,
wire, and a printed wiring board (PWB), ensuring a uniform voltage output
to even high-power modules. The 4001C-P Bin is recommended for use with
the higher-current power supplies (the 4002D and 4002E).
The 4001A-P and 4001C-P NIM Bins can be ordered as separate bins for
use with existing power supplies, or ordered assembled with the
appropriate NIM bin power supply. The NIM bins incorporate the necessary
brackets for rack mounting
| Connectors |
12 each as specified by
DOE/ER-0457T |
Installed
Wiring -
Model 4001A-P |
All
connectors wired in parallel for +12 V, –12 V, +24 V, –24 V, +6
V, –6 V, high-quality ground, power-return ground, and 117 V AC,
in accordance with DOE/ER-0457T pin assignments using flexible
wiring. An interface connector is supplied as required by
DOE/ER-0457T for connecting control and power supply |
Installed
Wiring -
Model 4001C-P |
As for the
model 4001A-P, except uses laminated busses as outlined in
DOE/ER-0457T for interconnection of the 12 module connectors.
Separate interface connector is supplied as required by DOE/ER-0457T
for connecting control and power supply |
| Control
Panel |
A control
panel with On/Off switch, power-indicating lamp, and thermal warning
lamp for mating power supply. The thermal warning lamp is
illuminated when the operating temperature approaches the design
limit. Voltage test points are provided for convenient monitoring of
the power supply outputs. |
| Construction |
Aluminum
alloy side plates with nickel-chromium-plated handles on front-panel
mounting flanges. Top and bottom members are high-tensile steel rod
weldments, nickel plated, containing module guides. Rear connector
plate is steel, cadmium plated. |
Dimensions and Weights
|
Model |
Dimensions |
Weight (approx.) |
| Height |
Width |
Depth |
Shipping |
Net |
| 4001A or 4001C Bin |
222 mm
(8.75") |
483 mm
(19") |
273 mm
(10.75") |
8.2 kg (18 lb) |
5.0 kg (11 lb) |
| 4001A/4002A Assembled |
222 mm
(8.75") |
483 mm
(19") |
406 mm
(16") |
15.9 kg (34 lb) |
11.8 kg (26 lb) |
| 4001A/4002D Assembled |
222 mm
(8.75") |
483 mm
(19") |
540 mm
(21.75") |
24 kg (53 lb) |
16.3 kg (36 lb) |
| 4001C/4002D Assembled |
222 mm
(8.75") |
483 mm
(19") |
540 mm
(21.75") |
24 kg (53 lb) |
16.3 kg (36 lb) |
| 4001C/4002E Assembled |
222 mm
(8.75") |
483 mm
(19") |
540 mm
(21.75") |
26.3 kg (58 lb) |
18.6 kg (41 lb) |
|
|
is
a trademark of AMETEK, Inc.